Brief Introduction
RF1100SE wireless module, using TI company's high performance CC1101 wireless communications chip (CC1100 improvement version, and direct replacement, performance parameters is better), largest number of transmission rate reached 500 KBPS, and can modify baud rate with software, open transmission distances up to 300 meters, the sensitivity to-110 dBm, high reliability, and can be widely applied in all kinds of occasions short-range wireless communication field (such as the wireless meter reading, industry control, low power consumption hand ChiJi, etc.). This section CC1100 module is equipped with antenna, with extremely high cost performance, has been mass industrial applications.

Specification
* Operating voltage: 1.8V ~ 3.6V (recommended 3.3V)
* Maximum transmission rate: 500kbps,
* Support for 2-FSK, GFSK and MSK modulation.
* Rate, power and frequency can be modified with software
* High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
* Built-in hardware CRC error detection, and address control
* Programmable control of output power, up to +10 dBm.
* Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment.
* Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
* Fast frequency changes brought about by a suitable synthesizer frequency hopping system
* Module can be software-based address, software programming is very convenient
* 2.54mm DIP spacing interfaces for embedded applications
* Separate 64-byte RX and TX data FIFO
* Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings
* Dimensions: 29 mm (L) x 16 mm (W) x 1 mm (H)

Package Content

433MHz Wireless RF Transceiver Module with Helical Antenna x 1pc